Hot air stenter setting machine
Machine Mainly Structure
Infeed Frame: E+Linfra red centering device.
- Rubber roller 315mm. Imported material made.
- Liquid tough is SS 304 made.
- body wall is 25mm thickness.
- Cylinder is Taiwan brand,pressure is adjustable and Max is 8tons.
- Driven device motor is 11kw.
Auto Weft straightner: E+Lbrand.
Two fabrics guide roller,each equips 1.5kw gear reducer motor.
Edge tracing E+L brand.
Two fingers Edge spreading,E+L brand
Overfeeding device: Overfeeding rate:20%～+50% ,Lenze motor driven
Hot air chambers
- Insulated wall is 150mm thickness.
- Two sets 7.5kw motor driven each chamber.
- Electric motor is “SIOEMENS”
- Nozzle thickness 0.8mm,zinc plate.
- Exhaust blower two sets,each is 5.5KW ,Blower motor is: Siemens
Rail pin plates
- Rail each side is 11sections,thickness is 6mm steel plate. Has been heat treatment.
- Chain oil maintain is about more than 8000hours.
- Driven motor is 11kw,two sets.
- Chain driven motor is Lenz of Germany.
Width adjust device
Totally 11sets，driven seperately,each driven by 0.75kw motor.
Coolant driven motor is 5.5KW。
Rolling and plaiting device
Rolling Max diameter is 500mm
Two sets blender jar,made by stainless steel.
- Heat exchanger:8sets
- Electric valve:8sets.
- PT100heat resistant components:8sets.
- Temperature controller:8sets
- Centering device
- Paddering pressing up
- Padder liquid discharge
- Padder liquid add in
- Tension control
- Wool brush up and down
- Chains tighting
- Electric cabinets, equips two sets industry air conditioning.
- Driven inverter, PLC and touching screen: Siemens brand
- Motor inverter：Siemens brand
- Low voltage: Simens brand
- Slam infra-red centering device
- Padder mangle
- Auto Electric weft straightner
- Weft correction device
- Width spreading device
- Edge spreading device
- Overfeeing pin on device
- Auto edge tracing device
- Pin plate chains
- Rail way
- Width adjust device
- Steam box
- Heat setting chamber
- Plaiter device
- Dust exhaust system
- Electric cabinet