Heat Setting Stenter (four six eight ten chambers)

Heat Setting Stenter (four six eight ten chambers)

Product Details:

  • Supply Ability : 100 Per Year

Product Description

Heat setting stenter (four six eight ten chambers)

YXLD2800 hot air stenter is mainly used for the cotton,polyester,wool,hemp of setting process for the open width fabrics, after worked by the machine, you can get stable size of the fabrics.

Technical flow:

open width fabrics infeed--infra red expanding and centering--padder--zidond lower overfeeding--screw expanding--machincial weft straigtner---upper overfeeding--edge spreader--infra-red inspector--pin on--heat setting---coolant---pin off--exit--plaiter or rolling

Mainly technical parameters

  • Machine working pattern: chains circulation horizontal rotary
  • Heat setting pattern: hot air circulation
  • Chains pattern: pitch 60mm,stainless steel chains.
  • Rail pattern stainless steel rail,graphite strip,non oil lubrication
  • Machine standard power: 380V5%50Hz3PH
  • Control power: 220V, 24V
  • Applicable steam specification: 3-6Kg/cmsaturated steam
  • Steam consumption: 100150kg/hour
  • Applicable compressed air specification0.3-0.6Mpa compressed air without moisture
  • Maximum temperature of the heating chamber: 220

Applicable heat sourch

  • A. Circulation thermal oil
  • B. 2Kpa-3.5Kpa natural gas
  • Circulation oil consumption80000-140000Kcal/ Hchamber0.33-0.6GJ
  • Natural gas consumption 8-15m/Hchamber(about6.5-12KG
  • Main chain driven pattern right and left chains drive seperately
  • Working width control pattern: working width of each chamber adjust seperately
  • Air delivery pattern of the heating chamber: upper blower chamber and lower blower chamber control air volume seperately.
  • Pin plate maximum working width2000mm-3000mm
  • Heating chamber width 3000mm/chamber
  • Mechanical speed 580m/min
  • Power of some parts Padder:12.5kw
  • Gluming,cutting,sucking device 6.74 KWoptional
  • Pneumatic edge spreader 3KW
  • Driven device 45 KW
  • Each chamber power: 15.75kw

Machine dimensionMax

L=18000+3000mm/chamber*N chamber
W=2700+working width

  • Machine weight about 12tons+4.5ton/chamber x N chamber
  • Machine colour jewellery blue + Crystal White
  • Insulated panel thickness:150mm
Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Textile Finishing Machinery' category

Back to top