Call Us
Home » Products » Open Width Compactor » open width compacting machine for knitting fabric

open width compacting machine for knitting fabric

open width compacting machine  for knitting fabric
Send Inquiry
Product Code : 8451800001
Price And Quantity
  • Minimum Order Quantity
  • 1
  • Unit of Measure
  • Set/Sets
  • Price Range
  • 100000.00 - 110000.00 USD ($)
Product Description
open width compactor is a combination machine of pin plate stenter and felt compactor, it is used for the processing of 100% cotton, wool, hemp natural fabrics and chemical fabrics in open width form. After treatment by this machine, the latitude and longitude of the fabric will be steady, soft hand feel, water shrinkage can be controlled within 5%.

Machine working pattern

chains circulation horizontal rotary

Compacting pattern

thickness 20-21mmNomex felt

Chains pattern

pitch 60mm,stainless steel chains

Rail pattern

stainless steel rail,graphite strip,non oil lubrication

Machine standard power

380V±5% 50Hz3PH

Control power

220V24V

Applicable steam specification

3-6Kg/cm²saturated steam

Steam comsumption

  • 100 150kg/hour

Applicable compressed air specification

  • 0.3-0.6Mpa compressed airwithout moisture

Maximum temperature of the dryer cylinder

190ƒ

Applicable heat sourch

A. Circulation thermal oil

B. Electric heated thermal oil

C. Steam

Circulation oil consumption

30000-40000Kcal/ H0.125-0.2GJ

Electric heated thermal oil consumption

25-54KW

Steam roller consumption

100-150Kg/H

Main chain driven pattern

right and left chains drive seperately

Felt maximum working width

2600mm

Pin plate maximum working width

2800mm

Width control pattern

front and back drive seperately

Machincial speed

535m/min

Power of some parts

  • gluming,cutting,sucking device 6.74 KW  optional

Pneumatic edge spreader 3KW

Driven device 25 KW

Machine dimension Max

L=15000

W=2570+working width

H=2800

Machine weight

  • about 12tons

Machine colour

jewelry blue + Crystal White

Machine characters:

  • Infra-red centering infeed device, correct the fabrics movement path automatically(shanghai brand)
  • Equip weft correct adjusting roller, cooperate with the stenter frame pin plate, with a different speed to correct the fabrics weft.
  • Pneumatic edge spreader (teeth spreader is optional) to flat the curled edges.
  • Far infra-red auto edge detector and tracing system made in Shanghai, which can guarantee the fabrics pin on correctly, the width of the pin can be controlled in minimum
  • The wool brush wheel overfeed and pin on, right side and left side are driven by the separately motor, controlled by the inverter, overfeeding rate is -20% -- +30%.
  • The chain copies Hercules of Germany
  • The right and left stenting frames are driven by the separately motor, can movement with the little different speed, cooperate with the weft straighter to correct the weft.
  • In front of the stenter frame and felt compacting unit, equip two steaming box made of stainless steel, the stenter frame steaming box equips air curtain in front side to block off the steam dissipation, which can guarantee the edge detector works normally (not disturb by the steam).
  • Two pieces of thicken felt(20mm), the felt is used to compacting and setting, especially for open width fabrics, material is Du pont Nomex.
  • Drying cylinder Heated by electric thermal oil (steam is optional), intelligent control. Temperature tolerance is +_3
  • The fabrics output by plaiting mode.
  • Equip synchrocontrol devices, can harmonize the proportional speeds of each units automatically.
  • Adjust the speed of the machine by inverter, HIM operation system. PLC programme controlled.

Machine structure

  • Infeed device section
  • Head of the machine section
  • Cone-shaped stenter frame section
  • Parallel stenter frame section
  • Steaming box section
  • Felt compacting units
  • Cooling system section
  • Plaiter section
  • Pneumatic section



Trade Information
  • FOB Port
  • tianjin qingdao
  • Payment Terms
  • Telegraphic Transfer (T/T), Letter of Credit (L/C)
  • Delivery Time
  • in 3 Months
  • Packaging Details
  • stander packing way
  • Main Export Market(s)
  • Western Europe, Eastern Europe, South America, North America, Australia, Asia
  • Certifications
  • ISO 90001

Dezhou Guanhua Textile Machinery Co.,Ltd
X


Dezhou Guanhua Textile Machinery Co.,Ltd All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.