|Home||» Products||» Rope Opening Slitting Squeezing Machine||» stainless steel balloon padder squeezer for tubular cotton fabric|
stainless steel balloon padder squeezer for tubular cotton fabric
- Minimum Order Quantity
- 1 SET
- Unit of Measure
- Price Range
- 45000.00 - 55000.00 USD ($)
- 45000usd USD ($)
- Product Type
- Textile Machine Type
- Spare/Component Type
- 3-45M /MIN m/m
- 5100mm×2750mm×2820mm Millimeter (mm)
- 4500 Kilograms (kg)
- 1 year
MAIN TECHNICAL SPECIFICATION
- Machine speed: 345m/min(Inverter control the motor, speed is adjustable)
- Motor power: 11.45kw
- Appliable compressed air pressure: 0.4-0.6Mpa
- Machine figure(L-W-H):5100mm 2750mm 2820mm
- Machine weight: 4.5T
- Machine capacity:minimum 4.5 ton & Maximum 5.5 ton (Depending on Fabric GSM: 160, Fabric Width: 20inch)
MACHINE INSTRUCTURE Turn table is driven by motor, it can turn clockwise or anticlockwise according to untwist needing.
(Detwister is optional)
- Fabrics open device(fabrics guide ring): Fabrics guide rings position (fabrics working breadth) is adjusted through lead screw, lead screw is driven by motor, and the motor is controlled by push button in control panel
- Infeed device: The infeed device is driven by motor; its speed can be adjusted by inverter,which can make sure the speed in phase.The web belt transports the fabrics, set with a moving adjust system to correct web belts running path; set with a lifting device draw by motor, lift or lower the in feed device facilitated to fabrics in feed.
Fabrics guide device
- Air ballooning device: This part includes hand operation air spray and automatic ballooning, the air spray is the main ballooing device. The automatic ballooning device is controlled by two pieces single reverse valve. It is the assistant device.
Water squeezing device and liquid squeezing device
- Each device consists of 2 sets(four pieces) rubber roller made of special material and 2 sets air cylinder ,each air cylinder is controlled by single reverse valve, the valve power on, the squeezing roller pressurizing ;power off, squeezing roller apart. The pressure of the squeezing roller is adjusted by two sets reduce valve. Set with 3-position rotary switch control motion of magnetic valve. The water squeezing device and softener expression device are driven by one motor separately, the two motors are controlled by inverter and speed can be adjusted, which made the fabrics run in non tension situation.
- Tension adjust device: Set with a regulation-resistance to adjust tension between liquid squeezing roller and delivery device.
- Fabrics exit device: This device is driven by inverter controlled motor ensure synchronous running.
- Heating device: The heating device consists of heating pipe, thermo-couple, filter, reverse valve, pneumatic driven stop valve and steam trap, it can keep liquid temperature constant automatically
- Blending jar: It consists of blender,heating pipe,water injection pipe; its function is blend softener and water fully.
- Driving device: The whole machine has 6 sets driving motors, among them in-feed motor,water squeezing motor, softener expression motor and plaiting motor are droved by inverters, the inverter is controlled by synchronous controller. rotate total adjust knops, the overalls speed changed. Moreover the speed of feed motor,water squeezing motor, softener expression motor and plaiting motor can be adjusted individually. Set with push button on control panel control Breadth motor and lift motor running clockwise or anticlockwise.start and stop push button control Blender motors running..
- Electric components: The inverter is Delta brand of Taiwan. Low voltage appliance is Schneider of France.
Main parts of the machine
- Inverter:Delta of taiwan 4sets
- Water squeezing roller: acid base resistant rubber roller two sets
- Softener expression roller: acid base resistant rubber roller two sets
- Gear box motor: 3kw 2sets
- Gear box motor :0.75kw 4sets
- Gear box motor:1.5kw 2sets
- Infeed web belt: 3175mmx1640mm Du pont of USA 2pcs(material is imported from Du pont and made in China)
- Bearing:made in China
Pneumatic components: shanghai of China
- Rough belt:40x2mm
- Channel steel,corner steel:10#,5# Ji steel
- Steel plate: thickness 10,3 shanghai Bao steel.
- Painting(machine skin coating):Tianjin of China
- Digital temperature controller: Shanghai
- Low voltage electric sets(like switch,indicator,relay): Schneider of France
- Chains: Hangzhou of China
- Triangle belt: Jinan of China
- Thermal couple: shanghai of China
- FOB Port
- tianjin qingdao
- Payment Terms
- Telegraphic Transfer (T/T), Letter of Credit at Sight (Sight L/C), Letter of Credit (L/C)
- Supply Ability
- 10 sets Per Year
- Delivery Time
- in 3 months Months
- Sample Policy
- Contact us for information regarding our sample policy
- Packaging Details
- stander packing way
- Main Export Market(s)
- Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
- Main Domestic Market
- All India
- ISO 9001 CE