Call Us
Home » Products » Tensionless Relax Dryer » Textile Finishing Machinery Relax Dryer Machine

Textile Finishing Machinery Relax Dryer Machine

Textile Finishing Machinery Relax Dryer Machine
Send Inquiry
Product Code : 8451800003
Brand Name : Deguan
Price And Quantity
  • Minimum Order Quantity
  • 1 set
  • Unit of Measure
  • Set/Sets
  • Price Range
  • 110000.00 - 150000.00 USD ($)
  • Price
  • 110000 USD ($)
Product Description

Introduction

  • The drying machine is used for drying cylinder and open-width fabric with three-layer belt. Because of circulating drying and run under different speed, the fabric could keep in loosen circumstance without any tension during the drying process. 
  • We provide corresponding machine according to different types of fabric to meet your requirements totally.
  • Based on the different width of belt, we could supply different models as following:
  • DGHG-2000mm/2400mm/2800mm/3200mm(standard)/3600 mm

Based on the different heat sources, we could supply the following models with six heating methods:

1. Steam (0.8MPa) 
2. Steam (2.8MPa) 
3. Heat conduction oil 
4.Gas (direct combustion) 
5. Gas (indirectly) 6. Biofuels

Our machines are equipped with conveyor belt made of Teflon material, it could bear high temperature and not pollute the fabric with non-staining.
 

Machine structure:

1. Constant tension feeding device

This device consists of body frame, active draw shaft, R shape fabrics trunk, slide pannel, Footboard and photoelectric controllers. Its function is feed the fabrics into machine smoothly, eliminate the unstablility of fabric€™s width and shrinkage caused by tension fluctuates.

2. Overfeeding device and holder

Four wheel driving, the position of the overfeeding wheel is driven by leading screw, electric adjustment, easy to operate. The overfeeding wheel is made of Polyurethane material, which has long life span. The holder is newly designed magnetic fluctuate model; there is no connection element between the left and right parts. Width can be adjusted in the range of 350mm-1450mm, during the adjustment, no need change folder, no need stop the machine.

3. Steaming device

It is made of stainless steel and double layers structure, upside nozzles are concave shapes and underside nozzles are convex shape, the design can prevent condensed water ejection. Main pipe equipped a stainless ball valve to control the steam volume. The steam device also includes a vapor liquid separator and a condensing device.

The upper part of Steam box can be opened by air cylinder, convenient to feed fabrics, when start the machine it close automatically.

4. Compacting section

The compacting section is the main part of the machine, this part includes electric oil cylinder,20mm ring felt and damping plate.

After steam humidification, the fabrics enter to the compacting and setting unit, The fabrics is compacted between the felt and damping plate, after the fabrics leave the damping plate, it goes into the setting area between cylinder and felt. The fabircs will be setted size under the high temperature cylinder, after the process, the fabrics obtain stable width and gloss soften surface.

The cylinder temperature can be adjust according to the process requirement, and controlled by a thermo-regulator, the temperature control precise ±1

The pneumatic device is used for direct the moving route of felt, the felt is tensioned by pneumatic cylinder and pressure is adjustable.

The main speed is the first cylinder speed, the second cylinder speed change follow the first speed, between the first cylinder and the second cylinder set with a tension adjust roll, which can keep the fabrics tension stable.

5. Conveyor belt

Conveyor is a special belt, its function is transport fabrics tensionless, and the fabrics on the belt does not drift. The speed is controled by main speed.

6. Folding device

Folding device include body frame, a pair of guide roll pressure plate lifting table and hydraulic system. The movement of lifting table is controlled by hydraulic, it fall automatically with folding height, and the fabrics can be transport out of the folder by conveyor belt automatically.

7. Drive device

The machine is droved by 4 gear reducer motors, the motor droved by inverter and controlled by PLC, HMI operating. Overfeeding ratio and main speed can be adjust according to process requirement, the set parameter memory storage when stop machine.

8. Electrical system

The electrical system consist of electric cabinet, PLC, inverter, synchronous controller, temperature controller, air breaker and operation panels.

Trade Information
  • FOB Port
  • tianjin qingdao
  • Payment Terms
  • Telegraphic Transfer (T/T), Letter of Credit at Sight (Sight L/C), Letter of Credit (L/C)
  • Supply Ability
  • 10 SETS Per Year
  • Delivery Time
  • in 3 months Months
  • Sample Available
  • Yes
  • Sample Policy
  • Contact us for information regarding our sample policy
  • Packaging Details
  • STANDER PACKING WAY
  • Main Domestic Market
  • All India
  • Certifications
  • ISO9001 CE

Dezhou Guanhua Textile Machinery Co.,Ltd
X


Dezhou Guanhua Textile Machinery Co.,Ltd All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.