Textile Finishing Stenter Machine

Textile Finishing Stenter Machine is used for drying and opening the fabrics into large width dimension with no wrinkles & damage quality. This is designed in horizontal in feeding fabric machine which has different sections that help to increase production rate per time. It is made from high grade stainless steel and iron material which is assembled in sturdy construction. Textile Finishing Stenter Machine is used to fabricate different kinds of fabrics viz. cotton/chemical fiber/mixed knitted & woven fabrics. It is simple to install and operate due to fully automatic machine.

The Stenter Machine is used for cotton, chemical fiber and blended knitted and woven fabric open width padding auxiliaries, drying and styling process.

 According to the width of the fabric, we can offer the following models:
 GHLD-1600/1800/2000/2200/2400/2600/2800/3000/3200/3400/3600/3800/4000 
 The machine is equipped with horizontal rollers, the diameter is from 360mm to 400mm based on the machine width of 3000mm or wider.
Functions of Stenter Machines

1. Heat setting is done by the stenter for lycra fabric, synthetic and blended fabric.
2. Width of the fabric is controlled by the stenter.
3. Finishing chemical apply on fabric by the stenter.
4. Loop of the knit fabric is controlled.
5. Moisture of the fabric is controlled by the stenter.
6. Spirility controlled by the stenter.
7. GSM of the fabric is controlled by stenter.
8. Fabric is dried by the stentering process.
9. Shrinkage property of the fabric is controlled.
10. Curing treatment for resin, water repellent fabric is done by the stenter.