Tubular balloon ballooning squeezer for knit cotton fabrics
Turn table is driven by motor, it can turn clockwise or anticlockwise according to untwist needing.
(Detwister is optional)
Fabrics open device(fabrics guide ring)
Fabrics guide rings position (fabrics working breadth) is adjusted through lead screw, lead screw is driven by motor, and the motor is controlled by push button in control panel
The infeed device is driven by motor; its speed can be adjusted by inverter,which can make sure the speed in phase.The web belt transports the fabrics, set with a moving adjust system to correct web belts running path; set with a lifting device draw by motor, lift or lower the in feed device facilitated to fabrics in feed.
Fabrics guide device
Set with Fabrics guide ring to ensure fabrics running in the middle of squeeze roll; set with 2sets limited switch control the fabrics tension between infeed roller and water squeezing roller,water squeezing roller and liquid squeezing roller to protect cloth guiding ring
Air ballooning device
This part includes hand operation air spray and automatic ballooning, the air spray is the main ballooing device. The automatic ballooning device is controlled by two pieces single reverse valve. It is the assistant device.
Water squeezing device and liquid squeezing device
Each device consists of 2 sets(four pieces) rubber roller made of special material and 2 sets air cylinder ,each air cylinder is controlled by single reverse valve, the valve power on, the squeezing roller pressurizing ;power off, squeezing roller apart. The pressure of the squeezing roller is adjusted by two sets reduce valve. Set with 3-position rotary switch control motion of magnetic valve. The water squeezing device and softener expression device are driven by one motor separately, the two motors are controlled by inverter and speed can be adjusted, which made the fabrics run in non tension situation.
Tension adjust device
Set with a regulation-resistance to adjust tension between liquid squeezing roller and delivery device.
Fabrics exit device
This device is driven by inverter controlled motor ensure synchronous running.
The heating device consists of heating pipe, thermo-couple, filter, reverse valve, pneumatic driven stop valve and steam trap, it can keep liquid temperature constant automatically
It consists of blender,heating pipe,water injection pipe; its function is blend softener and water fully.
The whole machine has 6 sets driving motors, among them in-feed motor,water squeezing motor, softener expression motor and plaiting motor are droved by inverters, the inverter is controlled by synchronous controller. rotate total adjust knops, the overalls speed changed. Moreover the speed of feed motor,water squeezing motor, softener expression motor and plaiting motor can be adjusted individually. Set with push button on control panel control Breadth motor and lift motor running clockwise or anticlockwise. start and stop push button control Blender motors running..
The inverter is Delta brand of Taiwan. Low voltage appliance is Schneider of France.